Peter Horobin SF Melbourne Jump Saddle 17.5″ M/MW

The Peter Horobin SF Melbourne Jump Saddle 17.5″ M/MW is a premium jumping saddle from Peter Horobin’s StrideFree range, developed around a close-contact riding position and the brand’s StrideFree tree technology. The Melbourne is designed to support rider mobility and balance while promoting freedom through the horse’s shoulders. Peter Horobin describes the StrideFree Melbourne range as having stirrup-bar alignment that works with the rider’s changing position during jumping.

This pre-owned black Peter Horobin SF Melbourne is in good working condition, with normal signs of use. It has a 17.5″ stamped seat measuring approximately 44.5cm, a 37.5cm flap, an M-MW measured gullet and 12cm front width between the panels. The tree is adjustable by a saddler, offering professional fitting flexibility.

Product Specifications

Peter Horobin SF Melbourne Jump Saddle Design

The SF Melbourne is part of Peter Horobin’s StrideFree jumping collection. The model was developed with an emphasis on close contact and rider mobility, using stirrup-bar positioning intended to support the rider as their centre of gravity changes during jumping.

Peter Horobin’s Melbourne designs are built around the StrideFree tree, which the manufacturer states is designed to provide freedom in the horse’s shoulder movement. The model is available in a range of seat sizes, including 17.5″.

17.5″ Seat and M-MW Gullet

This saddle has a 17.5″ stamped seat, measuring approximately 44.5cm. The flap measures 37.5cm from the stirrup bar, providing a practical jumping configuration.

The gullet is measured M-MW and is not stamped. The front width between the panels is approximately 12cm. The tree is adjustable by a saddler, allowing professional alterations where appropriate.

Because saddle fit can vary between individual horses and previously adjusted saddles, the measured gullet should be used as a guide and confirmed by a qualified saddle fitter before use.

Wool-Flocked Panels and Channel

The saddle has flocked panels measuring approximately 45–46cm. The channel measures 7cm midway and 8cm at the rear.

Peter Horobin’s SF jumping saddles use wool-flocked panels, with the manufacturer noting that these panels can be repacked on site. The Melbourne range also incorporates generous channel width intended to provide spinal clearance.

Close-Contact Jumping Position

The SF Melbourne has been developed for riders looking for a close-contact connection while jumping. Peter Horobin describes the Melbourne as having stirrup-bar alignment designed around the dynamic movement of the rider, helping support a balanced position during jumping.

The StrideFree Melbourne family is available with different knee-block options, allowing the saddle configuration to be tailored to individual rider preferences.

Condition

This is a pre-owned Peter Horobin SF Melbourne in good working condition.

The saddle shows the following signs of use:

• Scuffs on the cantle
• Wear on the reinforced leather around the flap edges and keepers
• Faint marks on the seat

These are visible signs of previous use and should be considered when assessing the overall cosmetic condition. The saddle remains suitable for riders looking for a functional Peter Horobin jumping saddle rather than a near-new cosmetic example.

Buyers should review the actual photographs carefully and have the saddle professionally checked for structural condition and fit before riding.

Short Description

Good working condition Peter Horobin SF Melbourne Jump Saddle 17.5″ M/MW in black. Pre-owned with cantle scuffs, wear around the reinforced flap edges and keepers, and faint seat marks. Features a 44.5cm measured seat, 37.5cm flap, M-MW measured gullet, 12cm front panel width, adjustable tree, flocked 45–46cm panels and 7–8cm channel width.